How can you put frozen fruit into the blender? This...
Read More
Blenders are a perfect kitchen appliance that many of us keep prominently displayed on our kitchen counters. Because they are such adaptable machines, the possibilities are virtually limitless. Regrettably, their life span is not infinite. To ensure that your blender runs as efficiently as possible, here are some helpful tips for maintaining your blender to extend its life.
If you’re a regular blender user, you should check out our simple do-it-yourself guide to extending the life of your appliance. Not only will they help it survive more prolonged, but they can also assist you in identifying potential problems before their occurrence. Additionally, we have divided the fifteen tips into three categories to help you.
1. How to use your blender correctly
1.1 Examine for damage
Before you begin using your blender (even daily), you should inspect it for damage. Examine the cord for tears and snags, and check that the blender jar’s glass or plastic is not broken, chipped, or cracked. Additionally, inspect the blades for a secure connection to the base and any visible damage such as rust or a bent blade. Using the appliance with an issue can result in significantly more problems than repairing it before use.
1.2. Make Use of It Properly
Before using a new blender, it is always a good idea to read the user manual provided by the manufacturer. While most of them are pretty self-explanatory, it’s essential to understand how long you can leave your machine running, how the jar should be secured to the base, and what signs to look for that indicate trouble.
1.3. Avoid Overloading
When using your blender, one of the most critical things to remember is not to overload it. Excessive food or liquids can cause the motor to wear out faster. Additionally, it increases the stress on the blades.
1.4. Exercise Caution When Applying Hard Foods
Blenders are intended for the mixing of softer foods and liquids. Unless your blender is specifically designed for it, you want to avoid using more challenging foods. For instance, you should prevent blending hard foods such as ice, ginger root, potatoes, etc.
If you must add something denser, ensure to cut it into smaller pieces before blending. As with overloading, tough foods can cause your motor to overheat and damage the blades.
Additionally, it can result in the seizing or jamming of your blades. We recommend using a food processor instead if you need to blend more challenging foods.
1.5. Do Not Run the Blender While It Is Empty
Running your blender on an empty tank can be just as detrimental as overloading it. Without any contents, the blades and motor will spin excessively, causing them to wear out more quickly. Always check that there is something in the machine before turning it on (even when cleaning—which we will discuss in the next section).
1.6. Correctly Put Your Ingredient
Many inexperienced blender users are unaware of a specific order in which food and liquids should be added to a blender.
- To begin, you should add any liquid that will allow the blades to move more freely.
- Following that, add powders to prevent them from sticking to the lid.
- Then, solids such as fruit can be added, followed by frozen or denser items such as frozen fruit, ice, or vegetables.
- Performing the heaviest items last will assist in pushing the remaining ingredients toward the blades.
1.7. Exercise Caution When Adjusting Speed Settings
Another critical care technique is to begin on a low setting and gradually increase to top speed. Pursuing maximum speed will eventually erode the motor and blades. However, it will result in a smoother blend of your recipe.
1.8. Close and secure the Lid
Right, we’ve all experienced what happens when you forget to close the blender’s lid. Making sure that the lid is not only on but also on correctly creates a suction that keeps your blend pulling toward the blades.
2. Cleaning your blender properly
2.1. Unplug the Blender
Since a blender is electrically powered, it is critical to unplug it before cleaning. Additionally, the base, which contains all electrical components, should never be submerged in water. Spot clean any spills with a damp cloth, sponge, or wipe.
2.2. Cleaning the jar of the blender
You want to ensure that you clean your jar immediately following each use. Allowing food to sit for an extended period makes it more difficult to remove it from the blades.
Additionally, it may cause them to rust over time. However, cleaning it is a relatively straightforward process. Begin by rinsing the container to remove any remaining debris.
After that, half fill it with lukewarm water and add a drop of dish detergent. At low speed, blend the water and soap for approximately a minute. Rinse thoroughly with water.
Tip: To remove stubborn stains, add a squeeze of lemon to your soap and water mixture. Additionally, you can use half a lemon to scrub the sides to remove stains.
2.3. Keeping the Blades Clean
Typically, the blades will clean themselves during the steps above, but occasionally, extra food may become stuck beneath the edges, which can be challenging to reach.
If this occurs, refill your blender halfway with warm water and soap. This time, however, you’ll want to include a tablespoon of vinegar and leave it alone overnight.
After the mixture has sat overnight, add additional hot water and blend. Any remaining residue should wash away, but you can also use an oxygen cleaner (Oxiclean) to remove more stubborn debris.
2.4. Periodic Maintenance
If you use your blender frequently, you should perform routine maintenance on it monthly. In this case, you’ll need to disassemble the machine.
Ensure that all gaskets, blades, and other components are removed. In warm water, wash by hand with liquid dish soap.
Before reassembling the machine, ensure that all components (particularly the gaskets) are completely dry.
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
2.5.Corroded Blades
If you notice your blender’s blades are becoming rusty, this does not always mean you need to purchase a new blender. However, you must remove the rust. To begin, remove the blades. Additionally, you will want to create a baking soda paste with water. Clean the blade first, then scrub the edge with a toothbrush to apply the paste. Following that, buff the paste in with steel wool to remove any remaining rust. Rinse under running water and pat dry.
Tip: Please note that this method is only effective on blades that have only a minor amount of rust on them. Using the blender should be discontinued if you are unable to remove all particles altogether.
3. Optimal Storage For Your Blender
3.1. Keep It Unplugged at All Times
You should not plug in your blender when not in use, even if it is a permanent fixture on your kitchen counter. Besides wasting energy, it will also wear down the appliance’s electrical components (over time).
3.2. Store in a Dry Area
If you rarely use your blender, you’re probably storing it elsewhere. Assure that it is kept in a dry, well-ventilated area where it will not contact any moisture. As with leaving it plugged in, moisture can cause damage to the unit’s electrical components. Not only that, but excessive moisture can result in rust and mildew.
4. Troubleshooting
The blender market is vast, with options ranging from the cheapest to the most expensive. When something goes wrong with a mid-to-high-level machine, it can be highly frustrating. Something can go wrong even if you take excellent care of your blender. Fortunately, you can troubleshoot and resolve a wide range of issues that many people mistakenly believe to be the cause of their appliance’s death rattle.
4.1. Jammed Blades
One of the most frequently encountered problems is jammed blades. When you turn on the blender, this is an obvious problem. The motor will hum, but the edges will not spin. Typically, the issue is caused by too large food and becomes lodged between the bottom and the blade. Empty the jar and chop the food into smaller pieces. Additionally, you can attempt to increase the speed to clear the jam. Whatever the case, if it does not work, you should immediately turn it off to avoid motor burnout.
4.2. If your blender does not turn on at all
It could be due to several different issues. To begin, ensure that the problem is not with the outlet you are currently using. Following that, you’ll want to inspect your blender’s electrical cord for damage. If this is the case, immediately discontinue use. If this does not resolve the issue, it could be a problem with the power switch.
4.3. Replacing A Switch
A switch replacement is much easier than a lot of people believe. Additionally, it is significantly less expensive than purchasing a new unit. If a button is defective, contact the manufacturer to place an order for a replacement (they may point you to a service center). Replacing the switch is typically as simple as removing a few screws, popping out the old button, and replacing it with the new one.
4.4. Resolve A Leak
Blenders frequently leak, too. The most common place to find the leak will be in the base, which connects to the blender jar. Another possible cause of the problem is the blade shaft.
Fortunately, the manufacturer will help you locate the necessary parts to resolve the issue quickly. Replacing the entire piece will be essential if the leak originates from the blender jar’s glass or plastic. As trying to repair it is likely to make it worse, and particles from the jar could end up in your beverage, do not try to fix it.
Note: It is critical to consult your blender’s owner’s manual and warranty before attempting any repairs on your own. Additionally, any issues with the motor or cord’s electrical system should be handled by a professional. Self-repairs may void your warranty, so carefully read all instructions first.
Helpful Tips For Maintaining Your Blender To Extend Its Life - FAQs
Cleaning is at the heart of daily, weekly, monthly, and annual blender maintenance. After each use, unplug the unit and thoroughly clean it with a clean, damp cloth. Wipe the blender down with a cloth and soap, and water at the end of the workday. Using a hose or applying excessive water pressure to the motor can cause damage.
It is recommended that blenders be inspected at least once a year by a qualified professional. Routine preventive maintenance should be carried out to ensure that the blending accuracy is maintained. The material dispensing gates and valves should be able to open and close with ease, and they should do so quickly and thoroughly.
Add warm water and 2-3 tablespoons olive oil to the cup. This is the mixture that you will blend. Additionally, pour some of the oil directly onto the blender blades’ spindle shaft. Turn the blades slightly by hand to incorporate the oil.
Blender injuries are most frequently caused by people accidentally turning them on while their fingers are down near the blades. To avoid this, unplug your blender while you’re loading it – and indeed, whenever you’re not using it.
Blenders are used for everything from smoothies and sauces to facemasks and body scrubs. Whatever you dice up in your blender, you may notice it begin to overheat. While overheating can manifest in various ways, the bottom line is that it is not a good thing.
To keep your container looking new and fresh, clean it immediately after you have finished using it. Wash it in warm soapy water or blend it at high speed with the same water as before. Rinse the machine thoroughly and repeat the process as many times as necessary to remove all of the dirt.
Eleven items that you should avoid blending in your blender.
- Extra-Scalding Liquids. The use of a blender to blend hot liquids is strictly prohibited…
- Potatoes. Things like potatoes and other thick and starchy foods do not typically blend well in a blender…
- Foods such as dried fruit
- Frozen foods
- Ice cubes
- Whole spices
- Coffee beans
- Bones are available examples.
- Raw High-Fiber Foods
- Whole Nuts
- Strong-Smelling Food
Running your blender on an empty tank can be just as detrimental as overloading it. Without any contents, the blades and motor will spin excessively, causing them to wear out more quickly.
Conclusion
Knowing how to maintain your blender is critical if you want to get the most extended life out of your blender. Even if you don’t use your blender regularly, it is still possible to keep your hard-earned money by following these simple maintenance tips. Finally, thanks for reading! Hopefully, this article has assisted you in taking excellent care of your blender.
Related Posts
Do you know how to clean a blender properly?
If you’re looking for an answer to the question, “How...
Read More
Best blenders for fruits and vegetables review
Fruits and vegetables are a delicious and exciting way to...
Read More
Is it possible to blend whole fruit in a blender?
You can blend whole fruit in a blender, depending on...
Read MoreWhy Trust Us
You will find what you are looking for at Jody's Bakery. From classic to luxury brands, you'll find both. We will help you to select appliances that fit your needs, budget and lifestyle. Whether you want to stop by to learn more — or plan to make a major purchase — we’ll treat you like family and assist you every step of the way. Shop with us today to receive friendly and experienced help along the way.
… [Trackback]
[…] Info on that Topic: jodysbakery.com/helpful-tips-for-maintaining-your-blender/ […]